The Best Brea Light of 2023

See Sylvania’s Application Guide in the Technical Details below to confirm compatibility

Specifically designed to withstand road vibration and provide longer life than traditional bulbs

Filament and gas mixture have been engineered for improved longevity

Meets industry regulations for performance, while bettering life expectancy

Produced by a trusted OEM automotive lighting manufacturer

Contains 2 bulbs

Twice the life of standard incandescent bulbs

Best value

Original equipment quality seal for the most reliable performance

Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time.

Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting

Fit type: Vehicle Specific Fit

STROBE FLASHING DESIGN - The T15 W16W 906 904 912 921 LED bulb will strobe 3 times (legal blinking times) before turning stable to offer you a more noticeable and safer stop.

HIGH POWER & 300% BRIGHTER - Each T15 W16W 906 904 912 921 LED bulb has 21pcs 2835-SMD LEDs which make it 3 times brighter than traditional halogen bulbs. 360° full-angle light will make your car more noticeable while braking.

NON-POL ARITY & EASY INSTALLATION - There is no need to worry about polarity direction nor fuse blowout, just simply plug and play and the installation will be finished within just 10 minutes.

ADVANTAGES Vs HALOGEN BULBS - The built-in intelligent IC driver of these brake lights can bring you a more energy-saving (from 16w to 4.5w), lower temperature (from 1000°F to 150°F), and longer life span (from 1000h to 30000h) performance without any UV/IR radiation.

PACKAGE INCLUDED - (Pack of 2) T15 W16W 906 904 912 921 LED bulb third brake lights Strobe Flashing replacements, 4.5W per bulb, 1100lm per bulb, 9-30V Wide voltage, 375Ma current, bulb size: 1.57in(L)*0.59in(W)+0.39in(H) net weight: 6g/pcs

(Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage:9v-30v

Fits: 1157 BAY15D 1016 1034 1157 1157A 2057 2057A 2357 2357A 2357NA 2397 3496 7528 p21/5w etc. Easy installation, plug and play.

Application: Brake Lights, Tail Lights, Daytime Running Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.

Advantage: Exclusive design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.

Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.

(Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high brightness chips per bulb, Working Voltage: 9v-30v.

Fits: 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc. Easy installation, plug and play.

Application: Brake Lights, Tail Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.

Advantage: Compatible for both CK/SRCK and Standard socket, non-polarity design. 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.

Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.

【ULTRA BRIGHT】 – Yorkim 7440 LED Bulbs Red comes with 2 pcs of high quality LED bulbs each designed with 54pcs 3014 & 4pcs 3030 chips radially mounted around the bulb to create a wide 360° viewing angle for better, brighter, allover light emission. 400% brighter than original halogen bulbs

【FITMENT】 – 7440 7443 7444 992 WY21W W21W. Super Bright 1650LM/bulb, Voltage 9-30V AC, Current-Output 300MA, Wattage 3.6W/Bulb(fits 12V-24V vehicles). **NOTE**50w Load resistor(Asin:B07KS6KMYG) might be needed to prevent the hyper flash when replacement for Turn Signal Lights

【EASY INSTALLATION】 – Yorkim 7440 RED LED bulb are Non-polarity designed for easy plug-and-play installation. It can be used as Back Up Reverse Light, Turn Signal light, Brake light, Parking light, Tail light, etc

【ENERGY EFFICIENT】 – Yorkim 7440 LED Bulb red T20 LED RED Brake Lights are designed with low temperature, low power consumption, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Smart IC Driver for Longer lifespan up to 50,000 hrs

【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. brake light, tail light, turn signal light, etc.). Although 7440 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product

(Set of 2 W2.5x16q D.F. wedge base 3156/3157 red LED bulbs) LED Chips: Each 3156/3157 LED red bulb is equipped with 39 pieces high quality, high power with high performance led chips per 3156 3157 LED bulb ---360 degree full angle illumination with projector lens design

Compatible with both standard and CK / SRCK type. Voltage: 12V - 14.8V, Built in stable current IC driver for longer lifespan. Color: Pure red.

Dual filament LEDs are universal fit for single filament and dual filaments T25 wedge base bulbs. Non-polarity. Cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, p27/7w, 3157/40610, 3157/17172, 12450004, 78633, 17945, 3156/21863, 9442003, 78625, 17941, etc.

Application: Used for upgrading OEM dim incandescent or damaged rear turn signals, directional blinker lamps, brake stop tail lights, taillights, rear side marker light amp for much safer driving and luxury looking for automotive cars, trucks, motorcycles, SUVs, vans.

Warranty: fully ONE YEAR guaranteed for the manufacturer defect.please check the fitment note application before purchasing.

Extra 50W 6ohm LED resistors maybe required to avoid the signal hyper flash or brake light error code due to LED bulbs draw much less power than stock lamps.

Fitments:Compatible for Ford F150 / Lincoln Models 2004-2008.

Performance Reliability and durability of OE

Full LED light source ensures great vision and brake/reverse indication, enhance safety during driving

High durability new material with UV coating to protect harmful sun light while provide long lasting light output performance

With the IP67 Waterproof Silicone built, it will prevent from any sand, water, dirt, snow or dust; DOT Approved.

(Set of 2) LED Chip Type: Equipped with 39 pieces high quality, high power with high illumination 2835 SMD LED chips per 7440 7443 red led bulb ---360 degree full angle illumination with projector lens design

Color: Brilliant pure red; Working Voltage: 12V~18V with built in IC driver for better working performance;

Fitment: replace the bulb harness of 992,7440, 7440LL, 7440ST, 7441, 7443, 7443LL, 7443ST, 7444, 7444LL, W21W, W21/5W, 7443-SCK, 7443-SRCK, etc

Application: Used for upgrading the dim incandescent or damaged T20 wedge W21W 7440 7443 brake stop lights, center high-mounted stop lights (3rd brake lights), rear turn signal, side marker, tail lights, taillights lamp, this bulb is compatible both Standard and CK/SRCK Type,safe and easy installation.

Warranty: Fully ONE YEAR guaranteed for the manufacturer defect.please check the owner manual or Amazon fitment note for brake stop light or tail light application before purchasing.NOT canbus free, extra load resistors maybe required to avoid the error code or signal hyper flash.

PERFECT FIT - SAE & DOT FMVSS-108 certified standard 6" size makes it easy to upgrade the dim, burnt-out, or damaged lights on your tractor, trailer, or work truck.

READY FOR THE WEATHER - With a sonically sealed, submersible, IP67 waterproof rating, our lights are better suited to deal with the elements. Go ahead, back them into a lake, they won’t mind.

BRIGHTER LIGHTS SAFER NIGHTS - We designed our tail lights with 10 super-bright colored LEDs behind colored diffused polycarbonate lens for true to color, improved visibility. Why? Because getting rear-ended can really ruin your day.

WORKING SMARTER NOT HARDER - We like it when things are easy, so we’ve included an easy to use grommet for you to upgrade your lights in mere minutes. We also added a space-saving 90 degree connector with 12" of wiring for installation in tight spaces.

STAND OUT - Our amber and red lights offer two intensity levels to function as parking lights or turn/brake lights, while the white lights offer a straightforward, one intensity, super-bright reverse/back-up light.